Search results for "temperature-programmed reduction"

showing 10 items of 13 documents

CoOx catalysts supported on alumina and alumina-baria: influence of the support on the cobalt species and their activity in NO reduction by C3H6 in l…

2003

Abstract CoO x catalysts (Co 1 and 3 wt.%) were prepared by incipient-wetness impregnation of the supports, Al 2 O 3 and Al 2 O 3 (80 wt.%)-BaO (20 wt.%), and calcined at 500 and 800 °C. The samples were characterized by X-ray diffraction (XRD) and BET techniques. H 2 -temperature programmed reduction (TPR) and UV-Vis diffuse reflectance spectroscopy (DRS) spectra were recorded with the aim to identify the different Co species formed. The presence of Co 2+ species tetrahedrally and octahedrally coordinated appears strongly influenced by the nature of the support and the cobalt content. Co 3 O 4 particles were detected after calcination at 500 °C, a successive treatment at 800 °C promotes th…

Barium oxideChemistryProcess Chemistry and TechnologyCatalyst supportInorganic chemistrychemistry.chemical_elementSelective catalytic reductionCatalysisCatalysislaw.inventionchemistry.chemical_compoundlawCalcinationTemperature-programmed reductionCobalt oxideCobaltApplied Catalysis A: General
researchProduct

Relationship between structure and CO oxidation activity of ceria supported gold catalysts

2005

Gold catalysts supported on cerium oxide were prepared by solvated metal atom dispersion (SMAD), by deposition-precipitation (DP), and by coprecipitation (CP) methods and were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The catalytic activity was tested in the CO oxidation reaction. The structural and surface analyses evidenced the presence of a modified ceria phase in the case of the DP sample and the presence of pure ceria and gold metal crystallites in the case of the SMAD and CP samples. The DP sample, after a mild treatment in air at 393 K, exhibited only ionic gold, and it was very active below 273 K. By…

Cerium oxideCoprecipitationChemistryInorganic chemistryIonic bondingSurfaces Coatings and FilmsCatalysisMetalX-ray photoelectron spectroscopyvisual_artMaterials Chemistryvisual_art.visual_art_mediumPhysical and Theoretical ChemistryTemperature-programmed reductionDispersion (chemistry)
researchProduct

Influence of SMSI effect on the catalytic activity of a Pt(1%)/ Ce0.6Zr0.4O2 catalyst: SAXS, XRD, XPS and TPR investigations

2004

Abstract The steady-state activity of NO reduction by C3H6, in lean conditions, was studied on a Pt(1%)/Ce0.6Zr0.4O2 catalyst, in a plug-flow reactor, in the temperature range 100–500 °C. The influence of reductive pre-treatments on the catalytic performance at low temperature (250 °C) was investigated. Enhancement of the activity was found for the catalyst pre-treated in hydrogen at 350 °C as compared to the sample pre-treated in H2 at 800 and 1050 °C. Moreover, transient reactivity tests of NO reduction by hydrogen were also carried out. As previously observed, the sample reduced at 350 °C was the most active catalyst. In both types of reactions the temperature and the nature of pre-treat…

HydrogenProcess Chemistry and TechnologyReducing atmosphereInorganic chemistryAnalytical chemistrychemistry.chemical_elementAtmospheric temperature rangeCatalysisCatalysischemistryTransition metalX-ray photoelectron spectroscopyTemperature-programmed reductionPlatinumCerium compounds Catalysts capacity OSCGeneral Environmental Science
researchProduct

Rare-earth ion exchanged Cu-SSZ-13 zeolite from organotemplate-free synthesis with enhanced hydrothermal stability in NH3-SCR of NOx

2019

The relatively low hydrothermal stability of Al-rich Cu-SSZ-13 catalysts hinders their practical application in ammonia selective catalytic reduction (NH3-SCR) reaction. Rare-earth ions were introduced into the Al-rich SSZ-13 zeolite using an organotemplate-free synthesis prior to the exchange of Cu2+ ions. Among the rare-earth ions tested (Ce, La, Sm, Y, Yb), Y shows significant enhancement of the hydrothermal stability and NH3-SCR activities after severe hydrothermal aging at 800 °C for 16 h when compared with Cu-SSZ-13 without Y. Cu–Y-SSZ-13 catalysts with various amounts of Y were prepared, and it is found that with increasing Y content, the low temperature NO conversions can be improve…

Materials science010405 organic chemistryInorganic chemistryInfrared spectroscopySelective catalytic reduction010402 general chemistry01 natural sciencesCatalysisHydrothermal circulation0104 chemical sciencesCatalysisSSZ-13AdsorptionTemperature-programmed reductionZeoliteCatalysis Science & Technology
researchProduct

H2-TPR, XPS and TEM Study of the Reduction of Ru and Re promoted Co/γ-Al2O3, Co/TiO2 and Co/SiC Catalysts

2016

<p class="1Body">Effects of Ru and Re promoters on Co-CoO<sub>x </sub>catalysts supported on γ-Al<sub>2</sub>O<sub>3</sub>, TiO<sub>2</sub> and SiC were investigated to improve the understanding of the role of promoters of the active phase of Co-CoO<sub>x</sub>-Ru and Co-CoO<sub>x</sub>-Re. The influence of promoter addition on the composition and activity of the catalysts was characterized by several methods, such as H<sub>2</sub>-TPR, XPS, chemisorption and TEM. Furthermore, the role of support and metal-support interaction was especially studied and different support materials were compared.</p&g…

Materials scienceInorganic chemistryOxidechemistry.chemical_elementTPR010402 general chemistry01 natural sciencesChemical reactionFischer-TropschCatalysisMetalchemistry.chemical_compoundX-ray photoelectron spectroscopyXPSkobolttita116010405 organic chemistrycobalt0104 chemical sciencesRutheniumchemistryChemisorptiontemperature-programmed reductionvisual_artTEMvisual_art.visual_art_mediumCobaltcatalystJournal of Materials Science Research
researchProduct

Co3O4/CeO2 composite oxides for methane emissions abatement: Relationship between Co3O4–CeO2 interaction and catalytic activity

2006

Abstract Co 3 O 4 /CeO 2 composite oxides with different cobalt loading (5, 15, 30, 50, 70 wt.% as Co 3 O 4 ) were prepared by co-precipitation method and investigated for the oxidation of methane under stoichiometric conditions. Pure oxides, Co 3 O 4 and CeO 2 were used as reference. Characterization studies by X-ray diffraction (XRD), BET, temperature programmed reduction/oxidation (TPR/TPO) and X-ray photoelectron spectroscopy (XPS) were carried out. An improvement of the catalytic activity and thermal stability of the composite oxides was observed with respect to pure Co 3 O 4 in correspondence of Co 3 O 4 –CeO 2 containing 30% by weight of Co 3 O 4 . The combined effect of cobalt oxide…

Process Chemistry and TechnologyInorganic chemistrychemistry.chemical_elementRedoxCatalysisCatalysischemistryAnaerobic oxidation of methaneThermal stabilityTemperature-programmed reductionCobaltCobalt oxideStoichiometryGeneral Environmental ScienceApplied Catalysis B: Environmental
researchProduct

Cerium effect on the phase structure, phase stability and redox properties of Ce-doped strontium ferrates

2006

Nanostructured perovskite-type Sr1−aCeaFeO3−x, (0⩽a<0.15) powders have been prepared by citrate–nitrate smoldering auto-combustion. Their phase structure and stability, surface and morphological properties, reduction behavior and interaction with oxygen have been investigated by X-ray Powder Diffraction combined with Rietveld Analysis, 57Fe Mossbauer and X-ray Photoelectron Spectroscopies, N2-adsorption method, Temperature Programmed Reduction and Oxidation experiments. Our results reveal that citrate–nitrate auto-combustion method is effective in obtaining single phase Sr1−aCeaFeO3−x. The Sr1−aCeaFeO3−x structure is cubic only for a⩾0.06, while for a<0.06 remains tetragonal. Moreover, for …

Rietveld refinementInorganic chemistrychemistry.chemical_elementCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsInorganic ChemistryCeriumTetragonal crystal systemchemistryPhase (matter)X-ray crystallographyMaterials ChemistryCeramics and CompositesPhysical chemistryPhysical and Theoretical ChemistryTemperature-programmed reductionPowder diffractionPerovskite (structure)
researchProduct

Structural and morphological properties of Co-La catalysts supported on alumina/lanthana for hydrocarbons oxidation

2004

Abstract Two Al 2 O 3 (24 wt%)–La 2 O 3 (76 wt%) supported Co–La oxides with Co loading 4 wt% and different La content (1 and 9 wt%) were prepared by co-impregnation of the support, the aluminum–lanthanum oxide, with cobalt and lanthanum nitrates in aqueous solution and successive calcination at 800 °C for 4 h. The alumina–lanthana was synthesized by the sol–gel method. The samples were characterized by X-ray diffraction (XRD) and Rietveld refinement in order to identify the crystalline phases and their relative weight. H 2 -TPR (Temperature Programmed Reduction) experiments were recorded with the aim to identify the different Co phases present. Co 3 O 4 and LaCoO 3 were formed for La loadi…

Rietveld refinementPEROVSKITEInorganic chemistryOxidechemistry.chemical_elementCondensed Matter PhysicsElectronic Optical and Magnetic Materialslaw.inventionCatalysischemistry.chemical_compoundCOMBUSTIONchemistrylawLACOO3Materials ChemistryCeramics and CompositesLanthanumCalcinationAtomic ratioTemperature-programmed reductionCobalt
researchProduct

Selective oxidative dehydrogenation of ethane over SnO2-promoted NiO catalysts

2012

[EN] Ni-Sn-O mixed oxides catalysts have been investigated for the oxidative dehydrogenation of ethane. The catalysts were prepared through the evaporation of aqueous solutions of nickel nitrate and tin oxalate and finally calcined in air at 500 degrees C for 2 h. These materials have been characterized by several techniques (N-2-adsorption, X-ray diffraction, High-Resolution Electron Microscopy, temperature programmed reduction, X-Ray Photoelectron Spectroscopy, Fourier Transformed Infrared Spectroscopy of adsorbed CO and O-18/O-16 isotope exchange). The addition of just a tiny amount of tin highly increases the selectivity to ethylene (from ca. 40% to 80-90%). Thus, high selectivity to et…

SnO2-promotedInorganic chemistrychemistry.chemical_elementInfrared spectroscopyTin oxideCatalysisOxalateCatalysisEthane ODHNiO catalystsEthane oxidationchemistry.chemical_compoundNickelEthyleneTin oxidechemistryDehydrogenationPhysical and Theoretical ChemistryTemperature-programmed reductionTinOxidative dehydrogenation of ethaneNickel oxideCatalyst characterization (XPS HREM oxygen isotope exchange FTIR CO adsorbed)
researchProduct

Ceria-based electrolytes prepared by solution combustion synthesis: The role of fuel on the materials properties

2016

Ce0.8Sm0.2O2 − xpowders were synthesized by solution combustion synthesis using citric acid, cellulose and sucrose as single, or intimately mixed, fuels. The powders were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2sorption at −196 °C, H2-temperature programmed reduction and thermogravimetric analyses. Textural properties of the powders were shaped by the peculiar employed fuel. The study of reducibility revealed that oxygen vacancies formation is mainly influenced by both parameters, specific surface area and total pore volume. The different tendency toward reduction played a key role in sintering under reducing atmosphe…

Thermogravimetric analysisMaterials scienceScanning electron microscopeInorganic chemistrySintering02 engineering and technology010402 general chemistry01 natural sciencesCatalysisCatalysiSpecific surface areaTemperature-programmed reductionSolution combustion synthesiGeneral Environmental ScienceIT-SOFC2300Reducing atmosphereProcess Chemistry and TechnologySamarium doped ceria021001 nanoscience & nanotechnologyMicrostructureSintering in reducing atmosphere0104 chemical sciencesDielectric spectroscopyIT-SOFC; Reducibility; Samarium doped ceria; Sintering in reducing atmosphere; Solution combustion synthesis; Catalysis; 2300; Process Chemistry and TechnologyChemical engineeringSolution combustion synthesisSettore CHIM/03 - Chimica Generale E Inorganica0210 nano-technologyReducibility
researchProduct